EZGas Pro

The EZGas Pro converts existing oil-fired boilers, furnaces and water heaters to natural gas or propane at a fraction of the cost of replacing the appliance. This natural gas converter comes factory packed with combustion control and gas fuel train. Unlike other conversion burners, it does not require a refractory liner – it fires with or without a combustion chamber.

Standard Equipment

Carlin EZGas Pro burners are fitted with the 60200FR gas primary control. The superior technology in this control has built-in alarm contacts, last fault alert, an LCD screen to easily view and change settings.

Carlin’s 41800 interrupted duty ignitor boasts a 9,000 volt output and solid-state technology that yields high performance, long life and durability. It also draws a low current to help save electricity.

Tech Specs

Input 50,000 to 275,000 NTUHs
Fuels Natural Gas or Propane
Minimum Supply Pressure 5.0 inches w.c.
Maximum Supply Pressure 14.0 inches w.c.
Manifold Pressure 3.5 inches w.c.
Electrical Power: 120vac, 60Hz, 1-Phase
Current: Approximately 2.0 Amps
Limit Circuit Input: 120vac, 60Hz
Motor: 1/15 HP, 3450 RPM, 60Hz
Motor Frame: 48-Frame, “M” Flange
Fuel Valve Power: 120vac, 60Hz
Ignition Carlin 41800 solid state electronic ignition
Ignition Voltage: 9,000 volts
Control Carlin 60200FR
Agencies UL Listed: U.S. (per ANSI Z21.17) and Canada (per CSA 2.7)

Homeowner Information

Annual Maintenance

We recommend a tune-up of your HVAC system at least once a year to keep everything running at peak efficiency. Ideally, this should be scheduled in the summer months to confirm your system is ready to go before heating season (October-February) arrives.

Freeze Protection

Central heating systems are prone to shut down as a result of power or fuel outages, safety related fault conditions or equipment failure. Installation of freeze protection monitoring or other precautions is recommended for unattended dwellings in climates subject to sustained below-freezing temperatures.