EZGas Pro Burner
Power Gas Burner 50,000-275,000 BTUH
As a natural gas conversion burner, this model is available with or without a burner cover. The EZGas Pro burner converts existing oil-fired boilers, furnaces, and water heaters to natural gas or propane at a fraction of the cost of replacing the appliance. This natural gas converter comes factory packed with combustion control and gas fuel train. Unlike other conversion burners, it does not require a refractory liner – fires with or without a combustion chamber. Proven in extensive boiler and furnace testing, these gas conversion burners will meet your needs for residential gas burning applications. If you have any questions about this or any other oil to gas conversion burner, please contact us at your convenience.
|
Input
|
50,000 to 275,000 Btuh |
|
|
Fuels
|
Maximum Supply Pressure: 14 inches w.c. Minimum Supply Pressure: 5.0 inches w.c. Manifold Pressure: 3.5 inches w.c. |
|
|
Control
|
Carlin 4 sec. Trial for Ignition (TFI) 1.3 Sec. FFRT Pre-purge Serviceman Reset Protection Latch-up after three consecutive lockouts Interrupted Duty Ignition Recyle on Flame Failure |
|
|
Electrical
|
Power: Current: Approximately 2.0 Amps Limit Circuit Input: 120 vac, 60 Hz Motor: 1/15 HP, 3450 RPM, 60 Hz Motor Frame: 48 Frame, “M” Flange Fuel Valve Power: 120 vac, 60 Hz |
|
|
Ignition
|
Carlin Ignition Voltage: 9,000 volts |
|
|
Orifice
Selection |
 |
|
|
Agencies
|
UL Listed: US & Canada – US per ANSI Z21.17, Canada per CSA 2.7 |
|
